manual of cermic ball valve
- Model Number: WZ644TC-150LB
- Brand Name: ZC
- Place of Origin: Zhejiang, China
- Minimum Order Quantity: 1 SET
- Supply Capacity: 5000/month
- Payment: T/T
- MemberShip: Free Member
- Inquiry Now
WZ644TC-150LB manual of cermic ball valve Description
Applocation :
Ball valve is made up of cock , its opening and closing is ball ,using ball aroud the axis of stem rotate 90 C to relization of opening and closing . Ball valve is mainly used for cuting , distribution and change the flow direction of medium in the line . Ceramic ball valve is a new knid of corrosion resistant ball valve .All of the ball , seat and everywhere the medium flow is made of ceramic in order to substrate from corrosion , sybstrate coated with a layer of enamel , then use ceramic lining . It is mainly used for electria power , petroleum , chemicial piping sustem such as the opeing and closing device .
Characteristics :
The valve is appliation as an on-of or piplines with high - hardness or with both soft graun and corrosive medium . Its mominal pressure is 1.6 Mpa , and applicable temperature ≤200℃
All medium - contacting parts are made of industricial ceramic , featuring extremely high chemical stability and hardness ( Rockwell Hardness HRC90) ,only nest to diamond . there fore this valve has extremely strong resistance to abrasion corrosion and erosion , good heat insulation and small thermal expansion . The ball is made with advanced grinding equipment and process , with high precisiom ball roundness and good surface quality , and after facing -up with the valve seat ,a good sealability can be obtained by means of self - lubrication of ceramic .
Thanks to the ceramic’s strong resistance to brasion , this valve is durable and extremely reliable with a long service life
Main Specification
Type
Q41TC-150LB
Norminal PRE (Mpa)
150LB
Shell Pre (Mpa)
2.4
Sealing Pre(Mpa)
1.76
Operated
Lever
Leakage
0
Suitable Tem
≤200℃
Suitable Medium
Sulfuric acid, such as corrosive medium
Connection
Flange
Material of main parts
Name
Body
Seat
Ball
Mid body Sleeve
Packing
Matrial
WCB
Ind Ceramic
Ind Ceramic
Ind Ceramic
High Tem Graphite
Structure drawing
1 Mid body sleeve ( runner ) 2 , Body 3 Ball 4 , Body 5 Stem , 6 Lever
Installation Notice
This valve is for the suible medium and temperature and there is no limilted of intallation angle
It must not knock when intalation
It must clean the dust in the innner champer and piping in order to be good sealing
Drivers are not allowed to do lifting .
Retaled category: Ball Valve
Hot search: knife gate valves with en1092 &, mss sp81 &, jis10k standard, high quality knife gate valves, gate valves